The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video. In this video, we're going to show you how to remove and install a new manual window regulator. That's the one with the hand crank on this 1998 Dodge Caravan, same as any '96 to 2000 Dodge Caravan, as well as the Plymouth Voyager. Manual Window Regulator by DormanĀ®. This product is a quality and affordable replacement for the factory part. Re-engineered to improve on the original design, the window regulator is quality tested to ensure trouble-free performance. Need to replace your Dodge Window Regulator Assembly? Then shop at 1A Auto for a high quality Window Regulator replacement for your Dodge at a great price. 1A Auto has a large selection of aftermarket Window Regulators for your Dodge and ground shipping is always free! Online shopping for Manual Window Regulators - Window Regulators & Motors from a great selection at Automotive Store. Window Lift Regulator Assembly Replacement.
When you turn a crank arm to raise or lower a manual window in a vehicle, a component known as a regulator, located on the inside of the door panel, actually makes the glass go up or down. Over time, or as the result of damage to the door panel, a manual window regulator can stop working. Fortunately, changing a manual window regulator is one of the easier do-it-yourself fixes in the world of auto repair, and you can save money by replacing it yourself.
Step 1
Disconnect the vehicle's battery. Even though the window regulator is manual, the inside of the door panel will have wires running through, and you must ensure no power runs through it while you perform the repairs.
![]() Step 2
Remove the vehicle's interior door panel. On most cars, you will perform this step by loosening the door handle mount screw with the appropriate screwdriver while turning the handle crank screw that holds the window in place. Always refer to your vehicle's owner's manual just to be on the safe side, however. Finally, remove any bolts or rivets securing the door panel in place using a socket wrench.
Step 3
Remove the glass retainer bolts -- for most vehicles, by turning the bolts counterclockwise. At this point, the glass pane will be loose, allowing you to pull it up and take it out of the door panel. Juniper software upgrade. Be careful not to chip, scratch or damage the glass when you set it down.
![]() Step 4
Locate the manual window regulator, and remove it by loosening the mount bolts with a socket wrench.
Step 5
Replace the damaged window regulator with a new one.
Step 6
Reposition the glass pane in its original position so it aligns correctly with your new window regulator. Place it in the same position it was in when you took it out in Step 3.
Press the door panel back into place by realigning it with its rivets. Tighten all remaining screws and bolts to secure the door panel.
Items you will need
Dodge Manual Window Regulator Replacement
Dodge Truck Window RegulatorMore ArticlesComments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |